Front Panel
The front panel has the Status LED, the configurable front button, and eight indicator lights. On this controller the eight lights split into two groups: the first four show activity (dark when idle, like every IgorBox), and the last four are always-on configuration markers, a faint at-a-glance readout of how the DMX side is set up.
Lights 1–4: activity
| Light | Shows | Colors |
|---|---|---|
| 1 | Input 1 | Bright purple when active, dark when idle |
| 2 | Input 2 | Bright purple when active, dark when idle |
| 3 | Relay output 1 | Bright green when on, dark when off (orange if the channel is inverted: bright = on, faint = off) |
| 4 | Relay output 2 | Same as relay 1 |
Lights 5–8: DMX configuration (always faint)
| Light | Shows | Colors |
|---|---|---|
| 5 | Refresh rate | Blue = 44/sec, green = 30/sec, orange = 20/sec, red = 10/sec |
| 6 | DMX out | Green = Standard, orange = Buffer, dark = Fixture mode |
| 7 | DMX in | Green = listening (Standard, input enabled), orange = Buffer, red = Fixture mode, dark = input off |
| 8 | Terminator | Green = built-in terminator on, red = off |
Together, lights 6–7 tell you the operating mode at a glance: green/green is Standard with the input listening, orange/orange is Buffer, dark/red is Fixture.
The rear panel adds a marker light beside every connector, plus its own mode and terminator lights. See Indicator Lights.
Mounting
Same chassis and mounting pattern as every current IgorBox controller. See Mounting for the footprint drawing, wall-mount and DIN-rail options, and hardware-reuse notes.