Tech Specs

The reference card for the install team.

danger

The figures here are working limits. If you choose to operate outside them, you do so at your own risk.

Power

Logic supply	9–24V DC, 5.5 × 2.1 mm barrel jack
Channel voltage	12V or 24V DC, set per-controller during provisioning

Outputs

Channels	16
Type	Solid-state low-side switching with current clamp
Current per channel	20 mA maximum (clamped)
Channel voltage	12V or 24V DC (per-controller, not per-channel)

The 20 mA clamp means the onboard channels are sized for indicators and signal-level use, not for driving lighting loads directly. For panel LEDs, pinspots, strips, or motor loads, use the RGBW-PWR breakout.

Inputs

Channels	2
Type	Optically isolated, polarity-insensitive
Voltage range	6–48V AC or DC

Audio

Output	Stereo line level, 3.5 mm TRS jack

The LED Controller has the same audio hardware as the rest of the lineup.

Connectivity

Ethernet	100Base-T, RJ45
WiFi	2.4 GHz, 802.11 b/g/n

Storage

32 GB onboard, formatted for low-latency audio playback.

Mechanical

Case material	Aluminum extrusion + ABS endcaps
Mounting	Wall, rack (with optional ear kit), DIN rail (with optional clip)
Operating temp	0–50 °C
Storage temp	-20–70 °C