Skip to main content

WiFi Credentials

If your controllers connect over WiFi, save the network details once in Studio and hand them to controllers during setup — instead of typing a password into every box. Manage them under Settings → WiFi Credentials (Admins and Owners only).

Credentials are stored securely and only sent to a controller during provisioning. Passwords are never shown again after you save them.

Add a network​

  1. Go to Settings → WiFi Credentials and click Add WiFi Network.
  2. Fill in:
    • Name — your own label for it (e.g., "Backstage", "Main Office").
    • Network Name (SSID) — the actual WiFi name.
    • Open network (no password) — check this for an open network; otherwise enter the Password.
    • Set as default — see below.
  3. Click Add Network.

The default network​

When you provision a new controller and don't pick a specific network, it uses your default credential. To change which one is default, open the menu on a network card and choose Set as Default.

Edit, delete, and "in use"​

Each saved network shows how many controllers are configured to use it.

  • Edit — change the name, SSID, or password. Leave the password blank to keep the existing one.
  • Delete — if any controllers are using it, Studio warns you; those controllers fall back to your default network the next time they're provisioned.

You can save up to 10 networks per Studio.

Documentation under /docs is licensed CC BY 4.0. Code samples are MIT. IgorBox™ trademarks and products are excluded — details.